FAQ No. FAQ00166
Question
A message saying the system is being
initialized is being displayed. How can I restore operation?
Answer
This message indicates that the Programmable Terminal is not communicating
with the host. To start communications, the Programmable Terminal's
communications settings must match the Programmable Controller's settings.
The communications protocol can be set to Host Link, 1:1 NT Link, or 1:N
NT Link with the communications settings in the Memory Switch Menu of the
System Menu's Maintenance Mode Menu.
The communications settings in the Programmable Controller depend on the
model of Programmable Controller being used. For details, refer to the
Programmable Controller's operation manual.
Other Programmable Terminal
FAQs
 When multiple PTs are connected to a PLC with 1:N NT Link communications and an error occurred in one of the PTs, is it possible to detect that error from the PLC?
What are the specifications of the NT-AL001 RS232C/RS-422A Link Adapter?
What method is used to store the screens in the NT30, NT31, NT620, and NT631?
| 
Sitemap
