FAQ No. FAQ00198
Question
In the
NS-series Programmable Terminals, is there a way to
create a group of buttons so that all of the other buttons go OFF when one
of the buttons is ON (i.e., only 1 button can be ON at a time)?
Answer
These buttons, also known as radio buttons, can be created by specifying
the same group number to the buttons on the Group Tab Page (an Expansion
Tab) of the ON/OFF Button Properties Dialog Box. Actually, the radio
buttons can be created by setting the desired buttons' action to
Alternate, and unifying all of the buttons into the same group on the
Group Tab Page, which is displayed when the Expansion Tabs are being
displayed.
Other Programmable Terminal
FAQs
 There are two serial ports on the NS-series PT, but can both ports communicate at the same time?
Can the PLC’s ladder diagram be displayed on an NS-series PT?
The NS-series PT is not equipped with an RS-422A port, so how can it communicate beyond the rated distance for RS-232C (15 m)?
| 
Sitemap
