|
E-Stop Switch Accessories for Better Safety Installations
JUNE 23, 2004 (ASIA PACIFIC) -
Omron Asia
Pacific is proud to announce the release of several new
external-mounted accessories to their existing A22E
E-Stop Switch range.
The current A22E E-Stop Switches are 22-mm in diameter and are
designed to be flush-mounted into either a panel or control box
(A22Z-B101Y; rated to IP65). All units provide finger-protection
and comply with several safety standards. They have a current
carrying capacity of up to 10A, at up to 440V AC.
A wide range of differing switch types are available, including
30, 40 or 60 mm diameter heads, some of which can be lit or
unlit, optional voltage reduction unit, various switch
configurations etc.
The new accessories include two types of shrouds, recessed
around the switches with 40mm heads. The shrouds improve the
overall appearance of the switch but do not restrict airflow
around it. They provide two main advantages: they minimize
unintentional activation (thereby reducing unnecessary system
interruptions) and protect the switch mechanism from accidental
damage.
The shrouds are available with either full enclosure around the
switch (A22Z-EG2)
or partial enclosure (A22Z-EG1). The former shroud complies
fully with both the SEMI S2-0200 and SEMATECH Application Guide
standards; the latter shroud complies only partially with these
standards.
Spacers are available to determine the amount of protrusion from
the control panel, as is a legend plate with black writing on a
yellow background.
For more information, please refer to:
Next »
Sliding Door Guide
|
Sitemap
