Solve Your Equipment Problems
from Design to Maintenance
Environment Cut Your TCO from Design to Maintenance
Control from a PLC is made easy by using function blocks. The Servo System
can be managed from design to maintenance with the CX-One FA Integrated
Smaller Servo Drivers for
Reduce footprint in the control panel.
The super-compact SMARTSTEP is now even
smaller. The footprint has been reduced by 52%, helping to reduce control
Downsized Servo Drivers
for Compact PLCs
Reduce your duct pitch.
SMARTSTEP2 is only 120 mm in height. By
mounting it onto the same duct as the compact CP1L PLC, the duct pitch can
be reduced, minimizing control panel space.
Realtime autotuning sets the optimum
An autotuning function calculates the device
load in realtime and automatically sets the optimum gain, simplifying the
Mount the Servo to a DIN Rail in one
The Servo Driver can be mounted onto a DIN
Rail in a single step by using the DIN Rail Mounting Unit (sold
separately) for easier assembly and easier maintenance replacements.
Easy Parameter Settings
for Mass Production
Use the Parameter Unit as a copy tool.
Parameter can be easily set for many Servo
Drivers using the Parameter Unit, enabling easier assembly work in mass
Reduce Tact Time
Achieve high-speed positioning and
The command pulse frequency at 500 kpps is
twice as fast as previous OMRON models, enabling high-speed and
Check the Present
Monitor positioning errors with a
The present position can be checked from the
host using the feedback pulse sent from the Servo Driver to the
Controller, allowing device errors to be monitored.
Change Pressing Force
Torque limiting function.
Set two torque limits, and switch between
the two limits depending on the application, such as pressing or part
Quick suppression of vibration with an
The vibration frequency is automatically
measured to remove vibration. Even if the resonant frequency changes,
realtime evaluation automatically follows the changes to reduce the effect
of vibration due to low mechanical rigidity, such as for conveyer belts.
Reduce Tact Time
High-speed positioning with vibration
Mechanical vibration at the stop position
caused by low mechanical rigidity can be suppressed by removing the