Up/Down Counting Pulse Indicator
last update: November 7, 2016
Supply voltage | 100 to 240 VAC, 24 VAC/VDC, DeviceNet power supply: 24 VDC | |
---|---|---|
Allowable power supply voltage
range |
85% to 110% of the rated power supply voltage, DeviceNet power supply: 11 to 25
VDC |
|
Power consumption *1 | 100 to 240 VAC: 18 VA max. (max. load)
24 VAC/DC: 11 VA/7 W max. (max. load) |
|
Current consumption | DeviceNet power supply: 50 mA max. (24 VDC) | |
Input | No-voltage contact, voltage pulse, open collector | |
External power supply | 12 VDC±10% 80 mA | |
Event
inputs |
Hold input | NPN open collector or no-voltage contact signal
ON residual voltage: 2 V max. ON current at 0 Ω: 4 mA max. Max. applied voltage: 30 VDC max. OFF leakage current: 0.1 mA max. |
Reset input | ||
Bank input | ||
Output
ratings (depends on the model) |
Relay output | 250 VAC, 30 VDC, 5 A (resistive load)
Mechanical life expectancy: 5,000,000 operations, Electrical life expectancy: 100,000 operations |
Transistor output | Maximum load voltage: 24 VDC, Maximum load current: 50 mA, Leakage current:
100 μ A max. |
|
Linear output | Linear output 0 to 20 mA DC, 4 to 20 mA DC:
Load: 500 Ω max, Resolution: Approx. 10,000, Output error: ±0.5% FS Linear output 0 to 5 VDC, 1 to 5 VDC, 0 to 10 VDC: Load: 5 kΩ max, Resolution: Approx. 10,000, Output error: ±0.5% FS (1 V or less: ±0.15 V; no output for 0 V or less) |
|
Display method | Negative LCD (backlit LED) display
7-segment digital display (Character height: PV: 14.2 mm (green/red); SV: 4.9 mm (green)) |
|
Main functions | Scaling function, measurement operation selection, output hysteresis, output OFF
delay, output test, and power interruption memory *2, display value selection, display color selection, key protection, bank selection, display refresh period, maximum/minimum hold, reset |
|
Ambient operating temperature | -10 to 55°C (with no icing or condensation) | |
Ambient operating humidity | 25% to 85% | |
Storage temperature | -25 to 65°C (with no icing or condensation) | |
Altitude | 2,000 m max. | |
Accessories | Watertight packing, 2 fixtures, terminal cover, unit stickers, instruction manual.
DeviceNet models also include a DeviceNet connector (Hirose HR31-5.08P-5SC (01)) and crimp terminals (Hirose HR31-SC-121) *3 |
Display range | - 19,999 to 99,999 | ||||||
---|---|---|---|---|---|---|---|
Measurement range | Functions F1, F2: ±2 gigacounts
Functions F3: 0 to 4 gigacounts |
||||||
Input signals | Contact input (dry contact input) (30 Hz max. with ON/OFF pulse width of 15 ms min.)
No contact voltage pulse |
||||||
Mode | Input frequency
range |
ON/OFF pulse
width |
ON voltage | OFF voltage | Input
impedance |
||
F1 | 0 to 30 kHz | 16 μs min. | 4.5 to 30 V | -30 to 2 V | 10 kΩ | ||
F2 | 0 to 25 kHz | 20 μs min. | |||||
F3 | 0 to 50 kHz | 9 μs min. | |||||
Open collector | |||||||
Mode | Input frequency
range |
ON/OFF pulse
width |
Note: The Up/Down Counting Pulse Meter will
malfunction if a pulse greater than the input frequency range is input. SYSERR may appear on the display. |
||||
F1 | 0 to 30 kHz | 16 μs min. | |||||
F2 | 0 to 25 kHz | 20 μs min. | |||||
F3 | 0 to 50 kHz | 9 μs min. | |||||
Connectable sensors | ON residual voltage: 3 V max.
OFF leakage current: 1.5 mA max. Load current: Must have a switching capacity of 20 mA or higher. Must be able to properly switch load currents of 5 mA or less. |
||||||
Max. No. of display digits | 5 (- 19999 to 99999) | ||||||
Comparative output
response time |
1 ms max.: Transistor output; 10 ms max.: Relay contact output
(time until the comparative output is made when there is a forced sudden change in the input signal from 15% to 95% or 95% to 15%) |
||||||
Linear output response
time |
10 ms max. (time until the final analog output value is reached when there is a forced
sudden change in the input signal from 15% to 95% or 95% to 15%) |
||||||
Display error when using
prescale |
±1 digit | ||||||
Insulation resistance | 20 MΩ min. (at 500 VDC) | ||||||
Dielectric strength | 2,300 VAC for 1 min between external terminals and case | ||||||
Noise immunity | 100 to 240 VAC models: ±1,500 V at power supply terminals in normal or common mode
(waveform with 1-ns rising edge and pulse width of 1 μs/100 ns) 24 VAC/VDC models: ±1,500 V at power supply terminals in normal or common mode (waveform with 1-ns rising edge and pulse width of 1 μs/100 ns) |
||||||
Vibration resistance | Frequency: 10 to 55 Hz; Acceleration: 50 m/s2, 10 sweeps of 5 min each in X, Y, and Z
directions |
||||||
Shock resistance | 150 m/s2 (100 m/s2 for relay outputs) 3 times each in 3 axes, 6 directions | ||||||
Weight | Approx. 300 g (Base Unit only) | ||||||
Degree of
protection |
Front panel | Conforms to NEMA 4X for indoor use (equivalent to IP66) | |||||
Rear case | IP20 | ||||||
Terminals | IP00 + finger protection (VDE0106/100) | ||||||
Memory protection | EEPROM (non-volatile memory)
Number of rewrites: 100,000 |
||||||
Applicable standards | UL61010-1, CSA C22.2 No. 61010-1-04
EN61010-1 (IEC61010-1): Pollution degree 2/Overvoltage category II EN61326-1 |
||||||
EMC | EMI: EN61326-1 Industrial electromagnetic environment
Electromagnetic radiation interference: CISPR 11 Group 1, Class A Terminal interference voltage: CISPR 11 Group 1, Class A EMS: EN61326-1 Industrial electromagnetic environment Electrostatic Discharge Immunity: EN61000-4-2: 4 kV (contact), 8 kV (in air) Radiated Electromagnetic Field Immunity: EN61000-4-3: 10 V/m sine wave amplitude modulation (80 MHz to 1 GHz, 1.4 to 2 GHz) Electrical Fast Transient/Burst Noise Immunity: EN61000-4-4: 2 kV (power line), 1 kV (I/O signal line) Surge Immunity: EN61000-4-5: 1 kV with line (power line), 2 kV with ground (power line) Conducted Disturbance Immunity: EN61000-4-6: 3 V (0.15 to 80 MHz) Power Frequency Magnetic Immunity: EN61000-4-8: 30 A/m (50 Hz) continuous time Voltage Dips and Interruptions Immunity: EN61000-4-11: 0.5 cycle, 0°/180°, 100% (rated voltage) |
last update: November 7, 2016