Digital I/O Slave Units with Screw Terminal Blocks (3-tier Terminal Block)
last update: September 24, 2012
Item | Specification |
---|---|
Communications power supply voltage | 14 to 26.4 VDC |
I/O power supply voltage *1 | 20.4 to 26.4 VDC (24 VDC -15%/+10%) |
Noise immunity | Conforms to IEC 61000-4-4, 2 kV (power line). |
Vibration resistance | 10 to 60 Hz with double-amplitude of 0.7 mm, 60 to 150 Hz and 50 m/s2 in X, Y, and Z directions for 80 min each |
Shock resistance | 150 m/s2 (3 times each in 6 directions on 3 axes) |
Dielectric strength | 500 VAC (between isolated circuits) |
Insulation resistance | 20 MΩ min. (between isolated circuits) |
Ambient operating temperature | -10 to 55°C |
Ambient operating humidity | 25% to 85% (with no condensation) |
Ambient operating atmosphere | No corrosive gases |
Storage temperature | -25 to 65°C |
Storage humidity | 25% to 85% (with no condensation) |
Terminal block screw tightening torque *2 | M3 wiring screws: 0.5 Nm M3 mounting screws: 0.5 Nm |
Installation | Mounted on 35-mm DIN Track or Mounting Bracket, or secured with M4 screws (depending on model) |
*1 The I/O power supply is called the sensor power supply in information for the CRT1-VAD04S.
*2 Applicable only to Slaves to which screw terminal blocks are mounted.
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-ID08TA | CRT1-ID08TA-1 | CRT1-ID08TAH-1 | CRT1-ID08TAH-1 |
I/O capacity | 8 inputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
ON voltage | 15 VDC min. (between each input terminal and the V terminal) |
15 VDC min. (between each input terminal and the G terminal) |
10.5 VDC min. (between each input terminal and the V terminal) |
10.5 VDC min. (between each input terminal and the G terminal) |
OFF voltage | 5 VDC max. (between each input terminal and the V terminal) |
5 VDC max. (between each input terminal and the G terminal) |
--- | --- |
OFF current | 1.0 mA max. | |||
Input current | At 24 VDC: 6.0 mA max./input At 17 VDC: 3.0 mA min./input |
|||
ON delay | 1.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Power supply short-circuit detection |
--- | Operates at 50 mA/point min. | ||
Disconnection detection | --- | Operates at 0.3 mA/point max. | ||
Number of circuits per common |
8 inputs/common | |||
Isolation method | Photocoupler | |||
Input indicator | LED (yellow) | |||
Installation | DIN Track | |||
Power supply type | Multi-power supply | |||
Current supplied to input devices |
100 mA/point | 50 mA/point | ||
Communications power supply current consumption |
30 mA max. for 24-VDC power supply voltage 50 mA max. for 14-VDC power supply voltage |
35 mA max. for 24-VDC power supply voltage 60 mA max. for 14-VDC power supply voltage |
||
I/O power supply current consumption |
5 mA max. for 24-VDC power supply voltage | 25 mA max. for 24-VDC power supply voltage | ||
Weight | 190 g max. | 200 g max. |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-ID16TA | CRT1-ID16TA-1 | CRT1-ID16TAH | CRT1-ID16TAH-1 |
I/O capacity | 16 inputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
ON voltage | 15 VDC min. (between each input terminal and the V terminal) |
15 VDC min. (between each input terminal and the G terminal) |
10.5 VDC min. (between each input terminal and the V terminal) |
10.5 VDC min. (between each input terminal and the G terminal) |
OFF voltage | 5 VDC max. (between each input terminal and the V terminal) |
5 VDC max. (between each input terminal and the G terminal) |
--- | --- |
OFF current | 1.0 mA max. | |||
Input current | At 24 VDC: 6.0 mA max./input At 17 VDC: 3.0 mA min./input |
|||
ON delay | 1.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Power supply short-circuit detection |
--- | Operates at 50 mA/point min. | ||
Disconnection detection | --- | Operates at 0.3 mA/point max. | ||
Number of circuits per common |
8 inputs/common | |||
Isolation method | Photocoupler | |||
Input indicator | LED (yellow) | |||
Installation | DIN Track | |||
Power supply type | Multi-power supply | |||
Communications power supply current consumption |
40 mA max. for 24-VDC power supply voltage 55 mA max. for 14-VDC power supply voltage |
40 mA max. for 24-VDC power supply voltage 70 mA max. for 14-VDC power supply voltage |
||
I/O power supply current consumption |
5 mA max. for 24-VDC power supply voltage | 25 mA max. for 24-VDC power supply voltage | ||
Weight | 330 g max. | 340 g max. |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-OD08TA | CRT1-OD08TA-1 | CRT1-OD08TAH | CRT1-OD08TAH-1 |
I/O capacity | 8 outputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
Rated output current | 0.5 A/output, 2 A/common | |||
Residual voltage | 1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
Leakage current | 0.1 mA max. | |||
ON delay | 0.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Load short-circuit detection | --- | Supported. | ||
Disconnection detection | --- | Operates at 3 mA/point max. (Does not operate at over 3 mA.) |
||
Number of circuits per common | 8 outputs/common | |||
Isolation method | Photocoupler | |||
Output indicators | LED (yellow) | |||
Installation | DIN Track | |||
Power supply type | Multi-power supply | |||
Current supplied to output devices |
100 mA/point | |||
Communications power supply current consumption |
35 mA max. for 24-VDC power supply voltage 55 mA max. for 14-VDC power supply voltage |
|||
I/O power supply current consumption |
15 mA max. for 24-VDC power supply voltage | 15 mA max. for 24-VDC power supply voltage |
35 mA max. for 24-VDC power supply voltage |
|
Output handling for communications errors |
Select either hold or clear from CX-Integrator. | |||
Weight | 190 g max. |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-OD16TA | CRT1-OD16TA-1 | CRT1-OD16TAH | CRT1-OD16TAH-1 |
I/O capacity | 16 outputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
Rated output current | 0.5 A/output, 2 A/common | |||
Residual voltage | 1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
Leakage current | 0.1 mA max. | |||
ON delay | 0.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Number of circuits per common | 8 outputs/common | |||
Load short-circuit detection | --- | Supported. | ||
Disconnection detection | --- | Operates at 3 mA/point max. (Does not operate at over 3 mA.) |
||
Isolation method | Photocoupler | |||
Output indicators | LED (yellow) | |||
Installation | DIN Track | |||
Power supply type | Multi-power supply | |||
Communications power supply current consumption |
45 mA max. for 24-VDC power supply voltage 65 mA max. for 14-VDC power supply voltage |
40 mA max. for 24-VDC power supply voltage 70 mA max. for 14-VDC power supply voltage |
||
I/O power supply current consumption |
15 mA max. for 24-VDC power supply voltage | 35 mA max. for 24-VDC power supply voltage |
||
Output handling for communications errors |
Select either hold or clear from CX-Integrator. | |||
Weight | 330 g max. |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-MD16TA | CRT1-MD16TA-1 | CRT1-MD16TAH | CRT1-MD16TAH-1 |
Installation | DIN Track | |||
Communications power supply current consumption |
40 mA max. for 24-VDC power supply voltage 60 mA max. for 14-VDC power supply voltage |
40 mA max. for 24-VDC power supply voltage 70 mA max. for 14-VDC power supply voltage |
||
Weight | 330 g max. | 340 g max. |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-MD16TA | CRT1-MD16TA-1 | CRT1-MD16TAH | CRT1-MD16TAH-1 |
I/O capacity | 8 inputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
ON voltage | 15 VDC min. (between each input terminal and the V terminal) |
15 VDC min. (between each input terminal and the G terminal) |
10.5 VDC min. (between each input terminal and the V terminal) |
10.5 VDC min. (between each input terminal and the G terminal) |
OFF voltage | 5 VDC max. (between each input terminal and the V terminal) |
5 VDC max. (between each input terminal and the G terminal) |
--- | --- |
OFF current | 1.0 mA max. | |||
Input current | At 24 VDC: 6.0 mA max./input At 17 VDC: 3.0 mA min./input |
|||
ON delay | 1.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Power supply short-circuit detection |
--- | Operates at 50 mA/point min. | ||
Disconnection detection | --- | Operates at 0.3 mA/point max. | ||
Number of circuits per common |
8 inputs/common | |||
Isolation method | Photocoupler | |||
Input indicator | LED (yellow) | |||
Power supply type | Multi-power supply | |||
I/O power supply current consumption |
5 mA max. for 24-VDC power supply voltage | 25 mA max. for 24-VDC power supply voltage |
Item | Specification | |||
---|---|---|---|---|
Model | CRT1-MD16TA | CRT1-MD16TA-1 | CRT1-MD16TAH | CRT1-MD16TAH-1 |
I/O capacity | 8 outputs | |||
Internal I/O common | NPN | PNP | NPN | PNP |
Rated output current | 0.5 A/output, 2 A/common | |||
Residual voltage | 1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the G terminal) |
1.2 V max. (0.5 A DC, between each output terminal and the V terminal) |
Leakage current | 0.1 mA max. | |||
ON delay | 0.5 ms max. | |||
OFF delay | 1.5 ms max. | |||
Load short-circuit detection | --- | Supported. | ||
Disconnection detection | --- | Operates at 3 mA/point max. (Does not operate at over 3 mA.) |
||
Number of circuits per common | 8 outputs/common | |||
Isolation method | Photocoupler | |||
Output indicators | LED (yellow) | |||
I/O power supply current consumption |
15 mA max. for 24-VDC power supply voltage | 35 mA max. for 24-VDC power supply voltage |
||
Output handling for communications errors |
Select either hold or clear from CX-Integrator. |
last update: September 24, 2012