CJ Series ID Sensor Unit
last update: December 19, 2013
Model | CJ1W-V680C11 | CJ1W-V680C12 | |
---|---|---|---|
Current
consumption |
Internal: 5 V | 0.26 A | 0.32 A |
Internal: 24 V/26 V | 0.13 A * | 0.26 A | |
External: 24 V | - | - | |
Ambient operating temperature | 0 to 55°C | ||
Ambient storage temperature | -20°C to 75°C | ||
Ambient operating humidity | 10% to 90% (with no condensation) | ||
Insulation resistance | 20 mΩ min. at 500 VDC | ||
Dielectric strength | 1,000 VAC for 1 minute | ||
Degree of protection | Mounted in panel (IP30) | ||
Vibration resistance | 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz
variable vibration at 9.8 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each |
||
Shock resistance | 147 m/s2 in X, Y, and Z directions 3 times each | ||
Appearance | 31 × 65 × 90 mm (excluding protrusions) | ||
Weight | 120 g max. | 130 g max. |
* When connected to the V680-H01-V2: 0.28 A.
Model | CJ1W-V680C11 | CJ1W-V680C12 | |||
---|---|---|---|---|---|
Unit classification | Special I/O Unit | ||||
Influence on CPU
Unit's cycle time |
0.15 ms | 0.3 ms | |||
Mounting location | CJ1-series CPU Rack or CJ1-series Expansion Rack
(Cannot be mounted to C200H Expansion I/O Racks or SYSMAC BUS Slave Racks.) |
||||
Connectable
Antennas |
V680-series Amplifiers and Antennas *1 | ||||
Applicable RF Tags | V680-series RF Tags | ||||
No. of allocated
units |
1 | 2 | |||
No. of allocated
words |
10 words | 20 words | |||
Control protocol | Special protocol | ||||
Data exchange
methods with CPU Unit |
Special I/O Unit
Area in CIO Area: CIO 2000 to CIO 2959 |
Constant data
exchange of 10 words/Unit |
CPU Unit to
ID Sensor Unit |
Unit controls, communications
processing specification, data storage area specification |
|
ID Sensor
Unit to CPU Unit |
Unit information, results information,
processing results monitor |
||||
Special I/O Unit
words in DM Area: D20000 to D29599 |
100 words/Unit
transferred when power is turned ON or when restarting the Unit |
CPU Unit to
ID Sensor Unit |
System Settings, Auto Wait Time
Setting, Write Protection Disable Setting, Antenna Connection Setting, Results Monitor Output, Test Setting, Run/Test Switching Method Setting |
||
Data transfer
quantity |
2,048 bytes max. (160 bytes/scan) *2 | 2,048 bytes max./channel (160 bytes/scan) *2 | |||
Operating modes | Run Mode | ||||
Test Mode | Communications tests
Distance level measurements Read speed level measurements Write speed level measurements Noise level measurements Communications success rate measurements |
||||
Diagnostic
functions |
(1) CPU watchdog timer
(2) Communications error detection with RF Tag (3) Antenna power supply error |
Model | CJ1W-V680C11 | CJ1W-V680C12 | |
---|---|---|---|
Unit classification | Special I/O Unit | ||
Mounting location | NJ-series CPU Rack or NJ-series Expansion Rack | ||
Connectable Antennas | V680-series Amplifiers and Antennas * | ||
Applicable RF Tags | V680-series RF Tags | ||
Operating modes | Run Mode | ||
Test Mode | Communications tests Distance level measurements Read speed level measurements Write speed level measurements Noise level measurements Communications success rate measurements |
||
Data exchange methods with CPU Unit | Data exchange by using I/O ports | ||
Diagnostic functions | (1) CPU watchdog timer (2) Communications error detection with RF Tag (3) Antenna power supply error |
Model | CJ1W-V680C11 | CJ1W-V680C12 |
---|---|---|
Communications control | (1) RF Tag Communications Speed (Normal Mode or High-speed Mode) (2) Write Verification Processing (3) Auto Wait Time Setting (4) UID Addition Setting (5) Write Protection Setting (6) Antenna Connection Setting (One-channel ID Sensor Unit (CJ1W-V680C11)) (7) Results Monitor Setting |
|
Commands | Read Write Bit Set/Bit Clear Mask Bit Write Calculation Write Data Fill Data Check Number of Writes Control Read with Error Correction Write with Error Correction UID Read Noise Measurement |
Read Write Bit Set/Bit Clear Mask Bit Write Calculation Write Data Fill Data Check Number of Writes Control Copy Read with Error Correction Write with Error Correction UID Read Noise Measurement |
Communications specification | Single trigger Single auto Repeat auto FIFO trigger * FIFO repeat * Multi-access trigger * Multi-access repeat * |
Model | NJ System | CJ System | CS System | |||
---|---|---|---|---|---|---|
CPU unit | Expansion unit | CPU unit | Expansion unit | CPU unit | Expansion unit | |
CJ1W-V680C11 | 4 units | 6 units | 4 units | 4 units | N/A | N/A |
CJ1W-V680C12 | 2 units | 3 units | 2 units | 2 units | N/A | N/A |
Model | NJ System | CJ System | CS System | |||
---|---|---|---|---|---|---|
CPU unit | Expansion unit | CPU unit | Expansion unit | CPU unit | Expansion unit | |
CJ1W-V680C11 | 2 units | 2 units | 2 units | 1 unit | N/A | N/A |
last update: December 19, 2013