Page top

Industrial Automation

Industrial Automation

E8PC

IoT Pressure Sensors

E8PC

Detect signs of abnormalities in hydraulic oil and sealant by simultaneous measurement of “pressure + temperature”

Sensors

Appearance Applicable
Medium *
Rated pressure
range
Control
output
Communication
method
IO-Link
baud rate
Model
3721_lu_1_1 Liquid and gas -0.1 to +1 Mpa PNP/NPN
selectable
IO-Link Analog COM2 E8PC-010SD-E
COM3 E8PC-010ST-E
Liquid 0 to +10 Mpa PNP/NPN
selectable
IO-Link Analog COM2 E8PC-100SD-E
COM3 E8PC-100ST-E
0 to +40 Mpa PNP/NPN
selectable
IO-Link Analog COM2 E8PC-400SD-E
COM3 E8PC-400ST-E

Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
* The applicable fluid is a liquid that do not erode the liquid contact part materials (such as water, glycol solution, and oil).

Adapters

It must be selected from the adapters below.

Appearance Type Nominal
diameter B
Thread type Materials Model
Nominal
diameter A
Nominal
diameter B
3721_lu_2_1 R1/8 male 6 A 1/8" R (taper thread) SUS304 E8PC-YA-A18
3721_lu_2_2 R1/4 male 8 A 1/4" R (taper thread) SUS304 E8PC-YA-A14
3721_lu_2_3 R3/8 male 10 A 3/8" R (taper thread) SUS304 E8PC-YA-A38
3721_lu_2_4 G1/4 female 8 A 1/4" G (parallel thread) SUS304 E8PC-YA-B14N
3721_lu_2_5 NPT1/8 male 6 A 1/8" NPT (taper thread) SUS304 E8PC-YA-C18
3721_lu_2_6 NPT1/4 male 8 A 1/4" NPT (taper thread) SUS304 E8PC-YA-C14

* The nominal diameter of the thread is the size of the part shown below on the adapter.

E8PC Lineup 5

Cables (Sensor I/O Connectors)

A Cable is not provided with the Sensor. It must be ordered separately.

Type Appearance Cable Model
Socket on one
cable end
Straight
3721_lu_3_1
2 m XS5F-D421-D80-F
5 m XS5F-D421-G80-F
L-shaped
3721_lu_3_2
2 m XS5F-D422-D80-F
5 m XS5F-D422-G80-F
Socket and plug on
cable ends *
Straight/straight
3721_lu_3_3
2 m XS5W-D421-D81-F
5 m XS5W-D421-G81-F
L-shaped/L-shaped
3721_lu_3_4
2 m XS5W-D422-D81-F
5 m XS5W-D422-G81-F

Note: Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details.
* Straight type/L-shape type combinations are also available.

Throttle

If the excessive pulsation or surge voltage is expected, use a throttle. Install it inside the adapter and use.

Appearance Type Material Model
3721_lu_4_1 For a male adapter SUS304 E8PC-YS
3721_lu_4_2 For a female adapter SUS304 E8PC-YS-N

E8PC Lineup 10

O-ring (for replacement)

Appearance Type Model
3721_lu_5_1 For E8PC-010[][] E8PC-YL-1 *
3721_lu_5_2 For E8PC-100[][]/-400[][] E8PC-YL-2 *
3721_lu_5_3 Female for adapter G1/4 E8PC-YL-3

* Provided with the sensor.