Page top

G6D-F4B / G3DZ-F4B

Terminal Relay

G6D-F4B / G3DZ-F4B

Easy-to-use, Space-saving Terminal Relay with Four-point Output

Ratings

Coil Ratings (per G6D Relay)

Rated voltage Rated current Coil resistance Must operate
voltage
Must release
voltage
Max. voltage Power
consumption
12 VDC 18.7 mA 720 Ω 70% max.
(see note 1)
10% min. 1.3 Approx. 200 mW
24 VDC 10.5 mA 2,880 Ω

Note: 1. The must operate voltage is 75% or less of the rated voltage if the Relay is mounted upside down.
2. Rated current and coil resistance were measured at a coil temperature of 23°C with a tolerance of ±10%.
3. Operating characteristics were measured at a coil temperature of 23°C.
4. The maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply. There is no continuous allowance.
5. The rated current includes the terminal’s LED current.

Contact Ratings (per G6D Relay)

Item Resistive load (cosφ = 1)
Rated load 3 A at 250 VAC, 3 A at 30 VDC
Rated carry current 5 A
Max. switching voltage 250 VAC, 30 VDC
Max. switching current 5 A
Max. permissible capacity (reference value) 1,250 VA, 150 W
Error rate (reference value) (see note) 5 VDC, 10 mA

Note: This value is for a switching frequency of 120 times per minute.

Power MOS FET Relay Specifications

Input (per G3DZ Power MOS FET Relay)

Rated voltage Operating voltage Must operate
voltage level
Must release
voltage level
Input impedance Rated current
12 VDC 9.6 to 14.4 VDC 9.6 VDC max. 1 VDC min. 2 kΩ±20% 8.0 mA±20%
24 VDC 19.2 to 28.8 VDC 19.2 VDC max. 4 kΩ±20% 8.2 mA±20%

Note: The rated current includes the terminal’s LED current.

Output (per G3DZ Power MOS FET Relay)

Load voltage Load current Inrush current
3 to 264 VAC
3 to 125 VDC
100 μ to 0.3 A 6 A (10 ms)

Note: There is no output polarity for the G3DZ.

Characteristics

Item G6D-F4B
Relay output
Contact resistance (see note 2) 100 mΩ max.
Must operate time (see note 3) 10 ms max.
Release time (see note 3) 10 ms max.
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between coil and contacts.
1,500 VAC, 50/60 Hz for 1 min between contacts of different polarity
750 VAC, 50/60 Hz for 1 min between contacts of same polarity
Impulse withstand voltage (between
coil and contacts)
4,000 V (1.2 × 50 μs)
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance Destruction: 500 m/s2
Malfunction: 100 m/s2
Endurance Mechanical: 20,000,000 operations min. (at 18,000 operations/hr)
Electrical: 100,000 operations min. (3 A at 250 VAC, resistive load)
100,000 operations min. (3 A at 30 VDC, resistive load) (at 1,800 operations /hr)
Ambient temperature Operating: -25°C to 55°C (with no icing)
Ambient humidity Operating: 45% to 85%
Weight Approx. 65 g

Note: 1. The above values are initial values.
2. Measurement condition: 1 A at 5 VDC
3. Ambient temperature condition: 23°C

Item G3DZ-F4B
Power MOS FET relay output
Must operate time 10 ms max.
Release time 15 ms max.
Output ON-resistance 2.4 Ω max.
Leakage current at OFF state 10 μA max. (at 125 VDC)
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between input and output terminals
1,500 VAC, 50/60 Hz for 1 min between contacts of different polarity
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance Destruction: 500 m/s2
Ambient temperature Operating: -25°C to 55°C (with no icing)
Ambient humidity Operating: 45% to 85%
Weight Approx. 65 g