Page top

page-top

Primary Contents

Programmable Controllers

Model Standard No. File No. Marking Listed/Recognized Category
C200HW-PD024, -PD025, -BC081, -ME04K, -ME08K
C200H-AD003, -ID212, -OC225
C200HE-CPU42
UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
CJ1
CP1H
CPM2A-20/30/40/60CDR-A
CS1W/CS1D/CS1G/CS1H
NSJ5/8/10/12/15
CJ2
CJ1W/CS1W-SCU31 cRUus Recognized NRAG2/NRAG8
CJ1W/CS1W-CRM21 RU NRAG2
CP1L/CP1E E229703 cULus Listed NRAG/NRAG7
CJ1W-CIF21 UL508 E95399 UL Listed NRAQ/NRAQ7
CPM1-CIF
SRM1-C01-V2, -C02-V2
C1000H/C2000H/3G2A5/3G2C5/C500/3G2A9 UL or cULus
C200H/C200HS
C200HX/C200HG/C200HE/C200HW
CPM1A/CP1W
CPM2C
CQM1
CQM1H
CS1W/CS1D/CS1G/CS1H
CV500/CV1000/CVM1/CV2000/CVM1D
IDSC
3G8F7/3G8F8-CRM21 cRUus Recognized NRAQ2/NRAQ8
3G8F7-DRM21
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
   Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
   Class II: Locations in which combustible dust is present.
   Class III: Locations in which easily ignitable fibers or flyings are present
   but are not airborne in sufficient quantities to ignite.
[Division]
   Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
   Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
   Class I:
   Group A: Acetylene
   Group B: Combustible gas/vapor, example: hydrogen
   Group C: Combustible gas/vapor, example: ethylene
   Group D: Combustible gas/vapor, example: propane

Machine Automation Controllers

Model Standard No. File No. Marking Listed/Recognized Category
NJ UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
NX-SID800 E229703
NX-SIH400
NX-SL3300
NX-SL3500
NX-SOD400
NX-SOH200
NX series
(excluding the Safety Controller Units)
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
   Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
   Class II: Locations in which combustible dust is present.
   Class III: Locations in which easily ignitable fibers or flyings are present
   but are not airborne in sufficient quantities to ignite.
[Division]
   Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
   Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
   Class I:
   Group A: Acetylene
   Group B: Combustible gas/vapor, example: hydrogen
   Group C: Combustible gas/vapor, example: ethylene
   Group D: Combustible gas/vapor, example: propane

Networks

Model Standard No. File No. Marking Listed/Recognized Category
GX-ID1611, OD1611, MD1611, ID1612, OD1612, MD1612, OC1601, AD0471, DA0271, EC0211, EC0241 UL508
ANSI/ISA12.12.01
E229703 cULus Listed NRAG/NRAG7
DRT2-ID16TA, OD16TA, MD16TA, ID16ML, OD16ML, ID16MLX, OD16MLX, ID32ML, OD32ML, MD32ML
GX-ID1618, OD1618, MD1618, ID3218, OD3218, MD3218, ID1628, ID3228, OD1628, OD3228, MD1628, MD3228 cRUus Recognized NRAG2/NRAG8
DRT2-ID32B, ID32BV, OD32B, OD32BV, MD32B, MD32BV
CRT1-VAD/VDA/VID/VOD/VMD/TS04P/TS04T
XWT-VOD/VMD
GX-JC UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
DRT2
XWT
GRT1
CRT1-OD16, ID16, DA02, AD04, CRS1-RPT01 RU Recognized NRAG2
DRT2-ID16S, MD16S cRUus NRAG2/NRAG8
CRT1
GRT1-CRT
CRT1B-ID02JS, ID04JS, OD02JS, OD04JS, -MD02JS UL508 E221438 cRUus Recognized NRAG2/NRAG8
DRT1-COM, -232C UL508 E95399 UL Listed NRAQ/NRAQ7
GT1-AD/DA/TS/CT
SRT2-ID04CL/08CL, OD04CL/08CL, AD/DA
W4S1-03B, -05B cULus
CRT1B-OD02S/SP, ID02S/SP, ID04SP, MD04SLP RU Recognized NRAQ2
B7A RU or cRUus NRAQ2/NRAQ8
SRT2-BSC01, ID/MD/OD, ROC/ROF/VID/VOD
GT1-ID/OD/ROP/BSC/ROS RU
DCA UL2238 E207683 RU * Recognized CYJV2
DCN UL2238 E207683 RU * Recognized CYJV2
XW4 UL1059 E245101 cRUus * Recognized XCFR2/XCFR8
* Marking on the package.
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
   Class II: Locations in which there is combustible dust.
   Class III: Locations in which easily ignitable fibers or flyings are present
   but are not airborne in sufficient quantities to ignite.
[Division]
   Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
   Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
   Class I :
   Group A: Acetylene
   Group B: Combustible gas/vapor, example: hydrogen
   Group C: Combustible gas/vapor, example: ethylene
   Group D: Combustible gas/vapor, example: propane

Wireless Units

Model Ratings File No.
WE70-AP
WE70-CL
24 VDC E312669

Programmable Terminals

Model Standard No. File No. Marking Listed/Recognized Category
NS5/8/10/12/15 UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
NT11
NT20-ST121
NT21-ST121
NB3Q/NB5Q/NB7W/NB10W UL508 E221438 cULus Listed NRAQ/NRAQ7
NB5Q/NB7W UL508 E221438 cULus Listed NRAQ/NRAQ7
NV3W/NV4W/NV3Q UL508 E95399 cULus Listed NRAQ/NRAQ7
NSH UL508 E95399 cULus Listed NRAQ/NRAQ7
NT31/NT31C UL or cULus
NT631/NT631C
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
   Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
   Class II: Locations in which there is combustible dust.
   Class III: Locations in which easily ignitable fibers or flyings are present
   but are not airborne in sufficient quantities to ignite.
[Division]
   Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
   Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
   Class I :
   Group A: Acetylene
   Group B: Combustible gas/vapor, example: hydrogen
   Group C: Combustible gas/vapor, example: ethylene
   Group D: Combustible gas/vapor, example: propane

IT Products

Model Standard No. File No. Marking Listed/Recognized Category
ITNC-EPX01, EPX01-DRM UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
   Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
   Class II: Locations in which there is combustible dust.
   Class III: Locations in which easily ignitable fibers or flyings are present
   but are not airborne in sufficient quantities to ignite.
[Division]
   Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
   Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
[Group]
   Class I :
   Group A: Acetylene
   Group B: Combustible gas/vapor, example: hydrogen
   Group C: Combustible gas/vapor, example: ethylene
   Group D: Combustible gas/vapor, example: propane

RFID Systems

Model Standard No. File No. Marking Listed/Recognized Category Ratings/Remarks
CJ1W-V600C11
CJ1W-V600C12
CS1W-V600C11
CS1W-V600C12
UL508 E104818 cULus Listed NMTR/NMTR7
CJ1W-V680C11
CJ1W-V680C12
CS1W-V680C11
CS1W-V680C12
UL508 E95399 cULus Listed NRAQ/NRAQ7
V600-CA5D01
V600-CA5D02
Input: 24V DCV, 0.8A
V680-CA5D01-V2
V680-CA5D02-V2
UL508 E95399 cULus Listed NRAQ/NRAQ7 Input: 24V DC, 0.8A
V680-HAM42-DRT Input: 24V DC, 0.2A
V680-HAM42-FRT Input: 24V DC, 0.3A
V680-HAM81
V680-HAM91
Input: 24V DCV, 0.15A
V750-BA50C04-US UL60950-1 E256842 cULus Listed NWGQ/NWGQ7 Input: 12V DC, 2.3A
A special AC Adapter is used.
The above models have a DC power supply. Be sure the following conditions are met.
Connect to one of the following circuits ((1) or (2)).
(1)
Limited-voltage/current circuit conforming to UL508
A circuit that uses, as the power supply, the secondary wiring of an insulating transformer
Maximum voltage (no-load state): 30 Vrms (42.4 V peak) max.
and
Maximum current:
1)
8 A max. (including short-circuited state) or
2)
The current is limited with a circuit-protection device (e.g., fuse) of the ratings shown in the following table:
No-load voltage (V peak) Maximum current rating (A)
0 to 20 5.0
Greater than 20 V peak,
no greater than 30 V peak
100/Peak voltage value
(2)
A Class 2 power supply unit conforming to UL1310 or circuit with maximum voltage of 30 Vrms (42.4 V peak) that uses, as the power supply, a Class 2 transformer conforming to UL1585
Note:Listing approvals