Page top

page-top

Primary Contents

Power Supplies

Model Ratings Standard No. File No. Marking Listed/Recognized Category
S82S 12 to 24V DC UL508 E104818 RU Recognized NMTR2
S8AS 100 to 240V AC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8EA-N/BN
(50/75/100/150W)
100 to 120V AC UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8EX-N
(15/30W)
100 to 240V AC UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8EX-P/BP
(50/100/150W)
100 to 240V AC UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8EX-BP
(240W)
100 to 240V AC UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8JX-G
(15/30/50/100/150(except 5V)W)
100 to 240V AC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8JX-G
(150(5V)/300/600W)
100 to 120V / 200 to 240V AC UL508 E316988 cRUus Recognized NMTR2/NMTR8
UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8M 24V DC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8T-DCBU-01 24V DC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8T-DCBU-02 24V DC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8TS
(25/30/60W)
100 to 240V AC UL508 E316988 cULus Listed NMTR/NMTR7
UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8VM
(15/30/50/100/150/300(24V)/600W(24V))
100 to 240V AC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognize QQGQ2/QQGQ8
S8VM
(300(5/12/15V)/600(5/12/15V)/1500W)
100 to 240V AC UL508 E104818 cRUus Recognized NMTR2/NMTR8
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8VS
(15/30/90/120/240W)
100 to 240V AC UL508 E316988 cULus Listed NMTR/NMTR7
UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
S8VS
(480W)
Screw terminal block
100 to 240V AC UL508 E104818 cULus Listed NMTR/NMTR7
UL60950-1 E152784 cRUus Recognized QQGQ2/QQGQ8
S8VS
(480W)
Screwless terminal block
100 to 240V AC UL508 E316988 cULus Listed NMTR/NMTR7
UL60950-1 E319923 cRUus Recognized QQGQ2/QQGQ8
Supplying Power to Sensors with DC Power Supplies
If a class-2 power supply is used, the Sensor itself does not have to be UL compliant; a standard model may be used.
The following Power Supplies comply with class 2.
Model File No. Remarks
S8AS E104818
S8TS(25/30/60W) E316988 Single-unit operation
S8VS(15/30/60/90(only models ending in "-S")W)
S8M(-CP04-RS) E104818
S8T-DCBU-01 *
S8T-DCBU-02 *
*Refer to the ratings, characteristics, and functions of the S8T-DCBU-01 and S8T-DCBU-02 for details.

Axial-flow Fans

Model Ratings Standard No. File No.
R87F-A[]A15HP
R87F-A[]A15MP
R87F-A[]A15LP
[]=1
[]=3
[]=4
[]=6
100V AC 50/60Hz
115V AC 50/60Hz
200V AC 50/60Hz
230V AC 50/60Hz
UL507 E100651
R87F-A[]A13HP
R87F-A[]A13LP
R87F-A[]A93HP
R87F-A[]A93LP
R87F-A[]A85HP
R87F-A[]A85LP
R87F-A[]A83H
R87F-A[]A83L
R87T-A[]A15HP
R87T-A[]A15MP
R87T-A[]A07H
R87T-A[]A05H
R87T-A[]A85H
R87T-A[]A83H
R87F-A[]A15H-WR

Power/Component Protective Components

Model Ratings File No.
SDV-F[][] 24V DC, 48V DC,
100/110V DC, 125V DC,
100/110V AC, 200/220V AC
E41515
K8AB-AS/-VS/-VW 24V AC/DC,
100/115V AC, 200/230V AC
E76675
K8AB-PH 200 to 500V AC(three-phase three-wire system)
K8AB-PM/-PA/-PW 200 to 480V AC(three-phase three-wire system)
K8AC-H 100 to 240V AC E200593
K8AK-LS 24V AC/DC,100 to 240V AC E329670
K8AK-AS/-AW/-VS/-VW 24V AC/DC,100 to 240V AC
K8AK-PH 200 to 480V AC(3-phase 3-wire)
K8AK-PM/-PA/-PW 1 : Low (3-phase 3-wire : 200/220/230/240V,
3-phase 4-wire : 115/127/133/138V)
2 : High (3-phase 3-wire : 380/400/415/480V,
3-phase 4-wire : 220/230/240/277V)
K8DS-PH 200 to 480V AC(3-phase 3-wire)

Wiring-reduction and Work-saving Components: Industrial Ethernet Connectors

Model Standard No. File No.
XS5 * UL2238 E207683
XS6 * UL1977 E103202
* The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Wiring-reduction and Work-saving Components: Sensor I/O Connectors

Model Standard No. File No.
XS5 * UL2238 E207683
XS2 * UL2238 E207683
XN2 UL1977 E103202
* The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Wiring-reduction and Work-saving Components: Connector-Terminal Block Conversion Units

Model Standard No. Standard No. Marking Listed/Recognized Category
XW2B (Servo Relay Units) UL508
ANSI/ISA12.12.01
E198998 cULus Listed NRAG/NRAG7
XW2B (Standard-type) UL508 E95399 cULus * Listed NRAQ/NRAQ7
XW2Z
* Marking not all show on certification products.
Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.
Note 2: Products that are certified for ANSI/ISA12.12.01 can be used in hazardous locations for Class I, Div. 2, Groups A, B, C, and D.
Description of Hazardous Locations:
[Class]
Class I: Locations in which flammable gases or vapors may be present in the air in sufficient quantities to be explosive or ignitable.
Class II: Locations in which there is combustible dust.
Class III: Locations in which easily ignitable fibers or flyings are present
but are not airborne in sufficient quantities to ignite.
[Division]
Division 1: Locations in which explosive or ignitable material is normally present or is present at certain times.
Division 2: Locations in which explosive or ignitable material is not normally present (but may accidentally exist).
【Group】
Class I :
Group A: Acetylene
Group B: Combustible gas/vapor, example: hydrogen
Group C: Combustible gas/vapor, example: ethylene
Group D: Combustible gas/vapor, example: propane

Sensor Controllers

Model File No.
(Category Control Number)
Ratings/Remarks
S3D2-AKB-US, -AK-US
S3D2-CKB-US, -CK-US
S3D2-BK-US
E41515
(Recognition approval)
NRNT2、NRNT8
Inputs:
100 to 240V AC 50/60Hz

Outputs:
3A 250V AC(Resistive)
S3D2-CCB-US, -CC-US Inputs:
100 to 240V AC 50/60Hz

Outputs:
100mA 30V DC
Sensors with DC Power-supply Specifications of 30 V Max.
1.
Use an OMRON S8VS Power Supply or other Class-2, UL-certified power supply for Sensors with power supply specifications of 30 V max.
Class-2 power supplies have output limiting capability that meets the requirements of UL 1310 or UL 1585.
With a Class-2 power supply, it is extremely unlikely that a fire will occur because of the lower amount of energy that is supplied.
2.
Sensors with power supply specifications of 30 V max. can be used in the US without UL certification if they are used with a UL-certified Class-2 power supply.
3.
Certification has been obtained for the models given in the following table, subject to the condition of use for Class-2 circuits.
Model File No.
E3 ( ) Series E41515
(Recognition approval)
E2 ( ) Series
TL ( ) Series
E4 ( ) Series
E6 ( ) Series
E8 ( ) Series
F3M Series
EE-S Series
Note: Numbers or letters are inserted in the parentheses that appear in the "Model" column.

Common Sockets

Model Ratings File No.
PF083A(-E)
PF113A(-E)
10A 250V E87929
8PFA
8PFA1
11PFA
14PFA
7.5A 250V
PY[]
PY[]A(-E)
7A 250V
PYF08S
PYF14S
10A 250V AC
PT08
PTF08A(-E)
15A 250V
PT11
PT14
PTF11A
PTF14A(-E)
10A 250V
P2CF-08(-E)
P2CF-11(-E)
10A, 250V AC
P3G-08 6A, 250V AC
P3GA-11 6A, 250V AC
PL08
PL11
PLE08-0
PLE11-0
10A 260V
P6B-06 8A 250V AC
P6B-26P 5A 250V AC
P6C 10A 250V AC
P2R(F)-05(-E) 10A 300V AC
P2R(F)-08(-E) 5A 300V AC
P2RF-05-S 10A 250V AC
P2RF-08-S 5A 250V AC
P6D ――
P7TM-06P 15A 250V
P7TM-06(-D) 15A 250V
P7TF-05 10A 250V
 
 
Model Contact Ratings
P7S-[] ―――
P7SA-[]