Page top

page-top

Primary Contents

Problems: Automatic chemical supply system stops due to unknown causes. System recovers automatically approximately 5 seconds after stopping. The PLC and other devices, however, need to be restarted. The line is operating for 24 hours, making it difficult to determine the specific cause.

One factor is the Switching Power Supply’s output stopping (overcurrent protection function). Propose investigating the inrush current of the device’s load, and using a redundant power supply system and an S8TS for redundant operation. Implement redundant operation with a set of S8TS.
Share |

Applicable Products

Block-type Switching Power Supply
S8TS

>> View other applications of S8TS

Other Applications