D5V

Contact Displacement Sensor

D5V

Contact Displacement Sensor with Built-in Amplifier That Enables In-line Measurement of a Wide Range of Objects with a Low Operating Force

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: December 27, 2013

Approved Standards

Approved Standard Ratings

Conformance to EN50081-1, pr50082-2

Rated current	100 mA
Rated voltage	24 VDC

Model	D5VA-3[]1	D5VM-3[]1
Supply voltage	12 to 24 VDC±10% (See note 1.)
Current consumption	80 mA max.
Measurement range	5 mm
Maximum actuator travel distance	Approx. 5.7 mm
Offset adjustment range	±0.25 mm
Resolution	10 μm	1μm
Linearity	0.5% FS max.
Repeat accuracy	10 μm max.
Response time	6 ms max.	37 ms max. (including transmission delay time)
Operating force	0.3 N max.
Output	Linear current output: 4 to 20 mA (Allowable load resistance: 0 to 300 Ω)	B7A serial communications output (See note 2.) (BCD and multipoint ON/OFF output modes) (See note 3.)
Mounting method	Two M4 screws
Indicators	Power and overtravel indicators	Power, overtravel, setting, and output indicators
Mechanical durability	10,000,000 operations min.
Temperature influence	±0.04% FS/°C max.
Operating temperature	-10 to 55 °C (with no icing or condensation)
Storage temperature	-25 to 65 °C (with no icing or condensation)
Humidity range	35% to 85% (with no icing or condensation)
Insulation resistance	100 MΩ min. (at 100 VDC)
Dielectric strength	1,000 VAC, 50/60 Hz for 1 min
Noise resistance	1.5 kV with a pulse width of 100 ns to 1 μs
Vibration resistance	10 to 55 Hz, 0.75-mm double amplitude
Shock resistance	196 m/s²
Connection cable	2 m (XS3F-M421-402-R provided)
Weight	Approx. 80 g (without cable)
Material	ABS and PC polymer alloy

Note:
1. If power is supplied to both the D5VM-3[]1 and B7A Output Link Terminal from a single power supply, the supply voltage must be 24 VDC±10%.
2. Connectable models:

Model number	Description
B7A-R6[][]1 B7AS-R6B[]1	Screw-terminal models
B7A-R[]A[]3-[]	PC-connector models
C200H-B7A21 C200H-B7A22 C200H-B7A11 C200H-B7A12	C200H B7A Interface Units
CQM1-B7A21 CQM1-B7A12 CQM1-B7A13	CQM1 B7A Interface Units
CJ1W-B7A22 CJ1W-B7A14 CJ1W-B7A04	CJW1 B7A Interface Units for use in standard mode only)

3. BCD or multipoint output mode can be selected with the mode selector.

last update: December 27, 2013

Product Category

Sensors
- Displacement Sensors / Measurement Sensors
  - Discontinued
    - D5V

Top of page