Menu
Industrial Automation
ZX-E
Smart Sensors (Inductive Displacement Type)
High-accuracy Detection of Metal Workpiece Displacement
Related Contents
Application Solutions
last update: November 9, 2016
Sensors
Sensor Heads
| Shape | Dimensions | Sensing distance | Resolution *1 | Model |
|---|---|---|---|---|
| Cylindrical | 3 dia. x 18 mm | 0.5 mm | 1 μm | ZX-EDR5T |
| 5.4 dia. x 18 mm | 1 mm | ZX-ED01T *2 | ||
| 8 dia. x 22 mm | 2 mm | ZX-ED02T *2 | ||
| Screw-shaped | M10 x 22 mm | ZX-EM02T *2 | ||
| M18 x 46.3 mm | 7 mm | ZX-EM07MT *2 | ||
| Flat | 30 x 14 x 4.8 mm | 4 mm | ZX-EV04T *2 *3 | |
| Heat-resistant, cylindrical | M12 x 22 mm | 2 mm | ZX-EM02HT *4 |
*1:For an average count of 4,096.
*2:Models with Protective Spiral Tubes are also available. Add a suffix of “-S” to the above model numbers when ordering.
(Example: ZX-ED01T-S)
As for ZX-EM07MT, please mention ZX-EM07M-S when ordering.
For detailed dimensions of the Protective Spiral Tube, refer to the information on the E39-F32A on the OMRON website.
*3: Be sure to use ZX-EDA Amplifier Unit version 1,200 or later with the ZX-EV04T.
*4: Be sure to use ZX-EDA Amplifier Unit version 1,300 or later with the ZX-EM02HT.
Amplifier Units
| Appearance | Power supply | Output type | Model |
|---|---|---|---|
 |
DC | NPN | ZX-EDA11 2M |
| PNP | ZX-EDA41 2M |
Note: Compatible connection with the Sensor Head.
Accessories (Order Separately)
Calculating Unit
| Appearance | Model |
|---|---|
 |
ZX-CAL2 |
Amplifier Mounting Brackets
A ZX-XBE1 is provided with the Sensor. Order an Amplifier Mounting Bracket separately if required.
| Appearance | Model | Remarks |
|---|---|---|
 |
ZX-XBE1 | Attached to each Sensor Head |
 |
ZX-XBE2 | For DIN track mounting |
Logging Tool for Personal Computers
| Appearance | Name | Model |
|---|---|---|
|
Communications Interface Unit (RS-232C) | ZX-SF11 |
|
Smart Monitor (Logging Software + Function Setting Software) | ZX-SW11EV3 *1 |
Setup Tool for Personal Computer
| Appearance | Name | Model |
|---|---|---|
|
Communications Interface Unit (RS-232C) + Smart Monitor Basic *2 (Function Setting Software) |
ZX-SFW11EV3 *1 |
*1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the Smart Monitor with the ZX-LDA11-N/41-N. Earlier versions cannot be used.
*2. The Smart Monitor Basic does not have a logging function.
Other than the logging function, the Smart Monitor Basic supports the same functions as the Smart Monitor.
Cables with Connectors on Both Ends (for Extension)*
| Cable length | Model | Quantity |
|---|---|---|
| 1 m | ZX-XC1A | 1 |
| 4 m | ZX-XC4A | |
| 8 m | ZX-XC8A |
* Robot cable models are also available. The model numbers are ZX-XC[]R.
Bank Unit
| Appearance | Model |
|---|---|
 |
ZX-SB11 |
last update: November 9, 2016
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.