Electrode Holder
last update: December 11, 2013
Model | PS-3S(R) *1 | PS-4S(R) *1 | PS-5S(R) *1 | PS-31 *2 |
---|---|---|---|---|
No. of Electrodes | 3 | 4 | 5 | 3 *3 |
Material | Resin (PBT = Polybutylene terephthalate) | |||
Insulation resistance | 100 MΩ min. | |||
Operating temperature | -10 to 70°C (with no icing) | |||
Operating pressure | Atmospheric pressure | |||
Applications | Water supply and drainage control in buildings | Limited Mounting Space | ||
Electrodes | Purchase F03-01 separately. | Single-piece construction |
Note:
1. The Two-wire Electrode Holders (R models) have a built-in resistor of 6.8 kΩ. They should be used with the Two-wire 61F Controllers.
2. Cut the electrodes to the desired length.
3. PS-31 comes in a 3-pole model only.
last update: December 11, 2013