Analog I/O Terminal 2-tier Terminal Block Type
last update: May 9, 2019
Item | Specification |
---|---|
Unit power supply voltage | 20.4 to 26.4 VDC (24 VDC - 15% to +10%) |
I/O power supply voltage | 20.4 to 26.4 VDC (24 VDC - 15% to +10%) |
Noise resistance | Conforms to IEC 61000-4-4, 2 kV (power line) |
Vibration resistance | 10 to 60 Hz with amplitude of 0.7 mm, 60 to 150Hz and 50 m/s2 in X, Y,
and Z directions for 80 minutes <Relay Output Unit GX-OC1601 only> 10 to 55 Hz with double-amplitude of 0.7 mm |
Impact resistance | 150 m/s2 with amplitude of 0.7 mm
<Relay Output Unit GX-OC1601 only> 100 m/s2 (3 times each in 6 directions on 3 axes) |
Dielectric strength | 600 VAC (between isolated circuits) |
Isolation resistance | 20 MΩ or more (between isolated circuits) |
Ambient operating temperature | - 10 to 55 °C |
Operating humidity | 25% to 85% (with no condensation) |
Operating atmosphere | No corrosive gases |
Storage temperature | - 25 to 65 °C |
Storage humidity | 25% to 85% (with no condensation) |
Terminal block screws
tightening torque * |
M3 wiring screws: 0.5 Nm
M3 terminal block mounting screws: 0.5 Nm |
Mounting method | 35-mm DIN track mounting |
Item | Specification | ||
---|---|---|---|
Voltage input | Current input | ||
Input capacity | 4 points (possible to set number of enabled channels) | ||
Input range | 0 to 5V
1 to 5V 0 to 10V - 10 to +10V |
4 to 20mA | |
Input range setting method | Input range switch: Common to input CH1/CH2, common to input CH3/CH4
SDO communication: Possible to set input CH1 to CH4 individually |
||
Maximum signal input | ± 15 V | ± 30 mA | |
Input impedance | 1 MΩ min. | Approx. 250 Ω | |
Resolution | 1/8000 (full scale) | ||
Overall accuracy | 25 ° C | ± 0.3% FS | ± 0.4% FS |
- 10 to 55 ° C | ± 0.6% FS | ± 0.8% FS | |
Analog conversion cycle | 500 μs/input
When 4 points are used: 2 ms max. |
||
A/D converted data | Other than ± 10 V: 0000 to 1F40 Hex full scale (0 to 8000)
± 10 V: F060 to 0FA0 Hex full scale ( - 4000 to +4000) A/D conversion range: ± 5% FS of the above data ranges. |
||
Isolation method | Photocoupler isolation (between input and communications lines)
No isolation between input signals |
||
Unit power supply current consumption | 120 mA max. (for 20.4 to 26.4-VDC power supply voltage) | ||
Weight | 180 g max. | ||
Accessories | Four short-circuit metal fixtures (for current input) * |
Item | Specification | ||
---|---|---|---|
Voltage output | Current output | ||
Output capacity | 2 points (possible to set number of enabled channels) | ||
Output range | 0 to 5V
1 to 5V 0 to 10V - 10 to +10V |
4 to 20mA | |
Output range setting method | Output range switch, SDO communications: Possible to set outputs
CH1 and CH2 separately. |
||
External output allowable load resistance | 5 kΩ min. | 600 Ω max. | |
Resolution | 1/8000 (full scale) | ||
Overall accuracy | 25 °C | ± 0.4% FS | |
- 10 to 55 °C | ± 0.8%FS | ||
Analog conversion cycle | 500 μs/input
When 2 points are used: 1 ms max. |
||
D/A converted data | Other than ± 10 V: 0000 to 1F40 Hex full scale (0 to 8000)
± 10 V: F060 to 0FA0 Hex full scale ( - 4000 to +4000) D/A conversion range: ± 5% FS of the above data ranges |
||
Isolation method | Photocoupler isolation (between output and communications lines)
No isolation between output signals |
||
Unit power supply current consumption | 150 mA max. (for 20.4 to 26.4-VDC power supply voltage) | ||
Weight | 190 g max. |
last update: May 9, 2019