Smart Fiber Amplifier Units
last update: May 8, 2019
Type | Connecting
method |
Appearance | Inputs/
outputs |
Model | |
---|---|---|---|---|---|
NPN output | PNP output | ||||
Standard
models |
Pre-wired (2 m) | 1 output | E3NX-FA11 2M | E3NX-FA41 2M | |
E3NX-FA11-5 2M *1 | --- | ||||
Wire-saving Connector | 1 output | E3NX-FA6 | E3NX-FA8 | ||
Advanced
models |
Pre-wired (2 m) | 2 outputs
+ 1 input |
E3NX-FA21 2M | E3NX-FA51 2M | |
Wire-saving Connector | 1 output
+ 1 input |
E3NX-FA7 | E3NX-FA9 | ||
2 outputs | E3NX-FA7TW | E3NX-FA9TW | |||
M8 Connector | 1 output
+ 1 input |
E3NX-FA24 | E3NX-FA54 | ||
2 outputs | --- | E3NX-FA54TW | |||
Infrared
models |
Pre-wired (2 m) | 1 output | E3NX-FAH11 2M | E3NX-FAH41 2M | |
Wire-saving Connector | 1 output | E3NX-FAH6 | E3NX-FAH8 | ||
Analog output
models |
Pre-wired (2 m) | 2 outputs | E3NX-FA11AN 2M | E3NX-FA41AN 2M | |
Model for Sensor
Communications Unit *2 |
Connector for Sensor
Communications Unit |
--- | E3NX-FA0 | ||
E3NX-FAH0 | |||||
Connector for Sensor
Communications Unit Pre-wired (2 m) |
1 output | E3NX-FA10 2M | E3NX-FA40 2M |
*1. This type can prevent mutual interference for two units in the SHS2 mode.
*2. A Sensor Communications Unit is required if you want to use the Fiber Amplifier Unit on a network.
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
Note: Protective stickers are provided.
Type | Appearance | Cable
length |
No. of
conductors |
Model | Applicable Fiber Amplifier Units |
---|---|---|---|---|---|
Master Connector | 2 m | 4 | E3X-CN21 | E3NX-FA7
E3NX-FA7TW E3NX-FA9 E3NX-FA9TW |
|
Slave Connector | 2 | E3X-CN22 | |||
Master Connector | 3 | E3X-CN11 | E3NX-FA6
E3NX-FA8 E3NX-FAH6 E3NX-FAH8 |
||
Slave Connector | 1 | E3X-CN12 |
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
Size | Cable | Appearance | Cable type | Model | ||
---|---|---|---|---|---|---|
M8 | Standard cable | Straight | 2m | 4-wire | XS3F-M421-402-A | |
5m | XS3F-M421-405-A | |||||
L-shaped | 2m | XS3F-M422-402-A | ||||
5m | XS3F-M422-405-A |
A Mounting Bracket is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
Appearance | Model | Quantity |
---|---|---|
E39-L143 | 1 |
A DIN Track is not provided with the Fiber Amplifier Unit. It must be ordered separately as required.
Appearance | Type | Model | Quantity |
---|---|---|---|
Shallow type, total length: 1 m | PFP-100N | 1 | |
Shallow type, total length: 0.5 m | PFP-50N | ||
Deep type, total length: 1 m | PFP-100N2 |
Two End Plates are provided with the Sensor Communications Unit.
End Plates are not provided with the Fiber Amplifier Unit. They must be ordered separately as required.
Appearance | Model | Quantity |
---|---|---|
PFP-M | 1 |
Attach these Covers to Amplifier Units.
Order a Cover when required, e.g., if you lose the covers.
Appearance | Model | Quantity |
---|---|---|
E39-G25 FOR E3NX-FA | 1 |
Type | Appearance | Model |
---|---|---|
Sensor Communications Unit for EtherCAT | E3NW-ECT | |
Sensor Communications Unit for CompoNet | E3NW-CRT *1 | |
Sensor Communications Unit for CC-Link | E3NW-CCL | |
Distributed Sensor Unit *2 | E3NW-DS |
Refer to your OMRON website for details.
*1. E3NX-FAH0 can not be connected.
*2. The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CompoNet is a registered trademark of the ODVA.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.
last update: May 8, 2019