Page top

Industrial Automation

Industrial Automation

V680S Series

RFID System

V680S Series

3 in 1 RFID: Antenna, Amplifier & Controller

Reader/Writer

Appearance Size Network Model
3198_lu_2_1 50 × 50 × 30 mm EtherNet/IP V680S-HMD63-EIP
PROFINET V680S-HMD63-PNT
3198_lu_2_2 75 × 75 × 40 mm EtherNet/IP V680S-HMD64-EIP
PROFINET V680S-HMD64-PNT
3198_lu_2_3 120 × 120 × 40 mm EtherNet/IP V680S-HMD66-EIP
PROFINET V680S-HMD66-PNT
3198_lu_2_4 50 × 50 × 30 mm Modbus TCP (TCP/IP) V680S-HMD63-ETN
3198_lu_2_5 75 × 75 × 40 mm V680S-HMD64-ETN
3198_lu_2_6 120 × 120 × 40 mm V680S-HMD66-ETN

RF Tag

V680S-series

Type Memory
capacity
Appearance Size Installation Model
Battery-less 2 K bytes
3198_lu_7_1
40 × 40 × 5 mm For flush mounting on
metallic surface
V680S-D2KF67M
For flush mounting on
nonmetallic surface
V680S-D2KF67
3198_lu_7_2
86 × 54 × 10 mm For flush mounting on
metallic surface
V680S-D2KF68M
For flush mounting on
nonmetallic surface
V680S-D2KF68
8 K bytes
3198_lu_7_3
40 × 40 × 5 mm For flush mounting on
metallic surface
V680S-D8KF67M *
For flush mounting on
nonmetallic surface
V680S-D8KF67 *
3198_lu_7_4
86 × 54 × 10 mm For flush mounting on
metallic surface
V680S-D8KF68M *
For flush mounting on
nonmetallic surface
V680S-D8KF68 *

* V680S-D8KF6[]M/V680S-D8KF6[] can be used with V680S series Reader/Writer version 2.00 or higher.

V680-series

Type Memory
capacity
Appearance Size Installation Model
Battery-less 1 K bytes
3198_lu_1_1
20 dia. × 2.7 mm For flush mounting on
nonmetallic surface
V680-D1KP54T
3198_lu_1_2
34 × 34 × 3.5 mm For flush mounting on
metallic surface
V680-D1KP66MT
For flush mounting on
nonmetallic surface
V680-D1KP66T
Environment-
resistant type
Battery-less
3198_lu_1_3
95 × 36.5 × 6.5 mm For flush mounting on
nonmetallic surface
V680-D1KP66T-SP
High-
temperature
type
Battery-less
3198_lu_1_4
80 dia. × t10 mm For mounting with
special attachment
V680-D1KP58HTN

Note: V680 series 8K-byte RF Tag can communicate with V680S series Reader/Writer.
            For details, contact your OMRON representative.

RF Tag Attachment

Type Appearance Model
For the V680-D1KP66T
3198_lu_3_1
V600-A86
For the V680-D1KP58HTN
3198_lu_3_2
V680-A80
For the V680-D1KP54T
3198_lu_3_3
V700-A80

Connector Cover

Consider using the following components to improve the vibration and impact resistance of the antenna or cable.

Type Fixing method Material Model Appearance Applicable reader/writer
Standard type Fixing screws in four
locations, with two locations
fixed with reader/writer
mounting screws (*1)
POM V680S-A63 3198_lu_10_1 V680S-HMD63-ETN
V680S-A64 3198_lu_10_2 V680S-HMD64-ETN
V680S-A66 3198_lu_10_3 V680S-HMD66-ETN
Slim type Fixing screws in two
locations (*2)
PBT V680S-A63-S 3198_lu_10_4 V680S-HMD63-ETN
V680S-HMD63-EIP
V680S-A64-S 3198_lu_10_5 V680S-HMD64-ETN
V680S-HMD66-ETN
V680S-HMD64-EIP
V680S-HMD66-EIP

*1 V680S-A63/A64/A66 includes four mounting holes for fixing.
    When mounting with a reader/writer already installed, or when no mounting holes for a new connector cover are
    available other than the reader/writer mounting holes, the connector cover can be fixed in two locations with the same
    mounting holes used for the reader/writer.
    This makes it possible to install the connector cover without the need for additional mounting holes.
    When tightening the products together in two locations, use the longer screw for the thicker part of the connector cover
    being tightened (thickness: 11.2 mm for V680S-A63, 6 mm for 680S-A64/A66).
*2 In addition to the reader/writer mounting holes, two mounting holes are required for the connector cover.
Note: For assemblies with an antenna, download and review the outline drawings available.

Cable

Recommended Ethernet Cable for EtherNet/IP and PROFINET (Connection between Host Device and Reader/Writer)

Use STP (shielded twisted-pair) cable of category 5 or higher.

Item Cable length (m) * Model
Wire Gauge and
Number of Pairs:
AWG22, 2-pair Cable
Rugged type
Cable with Connectors
on Both Ends
(M12 Straight/RJ45)
3198_lu_8_1
0.3 XS5W-T421-AMC-K
0.5 XS5W-T421-BMC-K
1 XS5W-T421-CMC-K
2 XS5W-T421-DMC-K
5 XS5W-T421-GMC-K
10 XS5W-T421-JMC-K
Rugged type
Cable with Connectors
on Both Ends
(M12 Right-angle/RJ45)
3198_lu_8_2
0.3 XS5W-T422-AMC-K
0.5 XS5W-T422-BMC-K
1 XS5W-T422-CMC-K
2 XS5W-T422-DMC-K
5 XS5W-T422-GMC-K
10 XS5W-T422-JMC-K

* Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available.
Note: For details, refer to the Industrial Ethernet Connectors Catalog (Cat.No.G019).

Recommended Power Cable for EtherNet/IP and PROFINET (Connection between Power Supply and Reader/Writer)

XS5F-D42[]-[]80-[]

Cable
specifications
Cable length
L (m)
Cable outer
diameter (mm)
Straight Connectors Angled Connectors Minimum
order
Model
Fire-retardant,
Robot cable
1 6 XS5F-D421-C80-F XS5F-D422-C80-F 10
2 XS5F-D421-D80-F XS5F-D422-D80-F 5
3 XS5F-D421-E80-F XS5F-D422-E80-F
5 XS5F-D421-G80-F XS5F-D422-G80-F
10 XS5F-D421-J80-F XS5F-D422-J80-F 1

Note: For details, refer to the Industrial Connectors Catalog (Cat. No. X082).

Cable for Modbus TCP (Connection between Host Device and Reader/Writer)

Type Appearance Length Model
Special connector --- RJ45 3198_lu_4_1 2 m V680S-A41 2M
5 m V680S-A41 5M
10 m V680S-A41 10M
Special connector --- RJ45
(Flexible cables)
3198_lu_4_2 2 m V680S-A51 2M
5 m V680S-A51 5M
10 m V680S-A51 10M
Special connector --- Loose wires 3198_lu_4_3 2 m V680S-A42 2M
5 m V680S-A42 5M
10 m V680S-A42 10M

Extension Cable for Modbus TCP (Connection between Host Device and Reader/Writer)

Type Appearance Length Model
Special connector --- Special connector 3198_lu_5_1 10 m V680S-A40 10M
20 m V680S-A40 20M
50 m V680S-A40 50M
Special connector --- Special connector
(Flexible cables)
3198_lu_5_2 2 m V680S-A50 2M
10 m V680S-A50 10M
20 m V680S-A50 20M

Note: 1. The extension cable can be used for the Reader/Writer for Modbus TCP V680S-HMD6[]-ETN.
           2. The cable can be extended up to 60 m by using an extension cable. Only one extension cable can be used.

Industrial Switching Hubs (Recommended Hubs)

Type Appearance Functions No. of ports Model
Industrial Switching Hubs 3198_lu_6_1 Quality of Service (QoS):
EtherNet/IP control data priority
10/100BASE-TX, Auto-Negotiation
5 W4S1-05D