E2EV

All Metal Proximity Sensor

E2EV

Long-distance Detection of Both Ferrous of Non-ferrous Metals

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: September 24, 2012

Model		E2EV-X2C1 E2EV-X2C2	E2EV-X5C1 E2EV-X5C2	E2EV-X10C1 E2EV-X10C2
Sensing distance		2mm ±10%	5 mm ±10%	10 mm ±10%
Set distance		0 to 1.4 mm	0 to 3.5 mm	0 to 7 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal and non-ferrous metal
Standard sensing object		Aluminum: 12 × 12 × 1 mm	Aluminum: 18 × 18 × 1 mm	Aluminum: 30 × 30 × 1 mm
Response frequency *		150 Hz	70 Hz
Power supply voltage (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption		15 mA max.
Control output	Load current	NPN open-collector output, 100 mA max. (at 30 VDC)
Control output	Residual voltage	2 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators		Detection indicator (red)
Operation mode (with sensing object approaching)		C1 Models: NO C2 Models: NC Refer to Datasheet.
Protection circuits		Reverse polarity protection, Load short-circuit protection, Surge suppressor
Ambient temperature range		Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s² 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 120 g	Approx. 140 g	Approx. 190 g
Materials	Case	Nickel-plated brass
	Sensing surface	Heat-resistant ABS
	Clamping nuts	Nickel-plated brass
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

* The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a
distance of twice the standard sensing object, and a set distance for the DC switching section of half the sensing
distance.

last update: September 24, 2012

Product Category

Sensors
- Proximity Sensors
  - Discontinued
    - E2EV

Top of page