Photoelectric Sensor
last update: May 28, 2014
Sensing method | Through-beam | Retroreflective | Diffuse reflective | |||
---|---|---|---|---|---|---|
NPN output | E3F3-T11 | E3F3-R11 | E3F3-R12 | E3F3-D11 | E3F3-D12 | |
E3F3-T16 | E3F3-R16 | E3F3-R17 | E3F3-D16 | E3F3-D17 | ||
E3F3-T61 | E3F3-R61 | E3F3-R62 | E3F3-D61 | E3F3-D62 | ||
E3F3-T66 | E3F3-R66 | E3F3-R67 | E3F3-D66 | E3F3-D66 | ||
PNP output | E3F3-T31 | E3F3-R31 | E3F3-R32 | E3F3-D31 | E3F3-D32 | |
E3F3-T36 | E3F3-R36 | E3F3-R37 | E3F3-D36 | E3F3-D37 | ||
E3F3-T81 | E3F3-R81 | E3F3-R82 | E3F3-D81 | E3F3-D82 | ||
E3F3-T86 | E3F3-R86 | E3F3-R87 | E3F3-D86 | E3F3-D87 | ||
Sensing distance | 5 m | 3 m (Non-
polarized when using E39-R1) |
2 m (Non-
polarized when using E39-R1) |
100 mm | 300 mm | |
Standard sensing
object |
Opaque object:
11 mm min. |
Opaque object: 56 mm min. | 100 × 100 mm white mat paper | |||
Hysteresis | --- | 20% max. of sensing distance | ||||
Light source
(wavelength) |
Infrared LED
(860 mm) |
Red LED (680 mm) | Infrared LED (860 mm) | |||
Power supply voltage | 12 to 24 VDC±10%, ripple (p-p): 10% max. | |||||
Current consumption | 45 mA max. (light
source and receiver) |
25 mA max. | ||||
Control output | Open collector transistor output, 100 mA max., residual voltage: 1 V max. at 100 mA | |||||
Protective circuit | Output short-circuit protection, DC power supply reverse polarity protection | |||||
Response time | 1.0 ms max. | |||||
Sensitivity adjustment | --- | Single-turn
adjuster |
||||
Ambient illumination | Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max. | |||||
Ambient temperature | Operating: -25 to 55 °C (with no icing or condensation)
Storage: -30 to 70 °C (with no icing or condensation) |
|||||
Ambient humidity | Operating: 45% to 85% (with no condensation)
Storage: 35% to 95% (with no condensation) |
|||||
Insulation resistance | 20 MΩ min. (at 500 VDC) between current carry parts and case | |||||
Dielectric strength | 1,000 VAC at 50/60 Hz for 1 min between current carry parts and case | |||||
Vibration resistance
(destruction) |
10 to 55 Hz, 1.5-mm double amplitude for 1 hour each in X, Y, and Z directions | |||||
Shock resistance
(destruction) |
500 m/s2 for 3 times each in X, Y, and Z directions | |||||
Degree of protection | IEC 60529 IP66 | |||||
Connecting method | Pre-wired (standard length: 2 m)/M12 connector | |||||
Indicators | Operation indicator (orange) [Power indicator of emitter (orange)] | |||||
Weight | Pre-wired | Metal: 200 g max. | Metal housing: 100 g max. | |||
Plastic: 170 g max. | Plastic housing: 85 g max. | |||||
M12
connector |
Metal: 120 g max. | Metal housing: 60 g max. | ||||
Plastic: 40 g max. | Plastic housing: 20 g max. | |||||
Packing | Nylon bag | |||||
Material | Case | Plastic: ABS, Metal: Nickel-brass | ||||
Lens | PMMA | |||||
Accessories | Screw nuts: ABS or Nickel-brass | |||||
Accessories | Screw nuts (4),
Instruction sheet |
Screw nuts (2), E39-R1 reflector,
Instruction sheet |
Screw nuts (2),
Instruction sheet |
Screw nuts (2),
Instruction sheet, Adjusting driver |
last update: May 28, 2014